// This code is written by Paul MacDougal for the December 11, 2017 meeting of TriEmbed.org
// It is released to the public domain
// It does what it does.

// DS3231 breakout board is:
// Vcc (3.3v)
// SDA (A4)
// SCL (A5)
// NC
// GND

#include <Wire.h>
#include "RTClib.h"
RTC_DS3231 rtc;

void printTime()
{
    DateTime now = rtc.now();

    if (now.month() < 10) { Serial.print("0"); }
    Serial.print(now.month());
    Serial.print('/');
    if (now.day() < 10) { Serial.print("0"); }
    Serial.print(now.day());
    Serial.print('/');
    Serial.print(now.year());
    Serial.print("  ");        
    if (now.hour() < 10) { Serial.print("0"); }
    Serial.print(now.hour(), DEC);
    Serial.print(':');
    if (now.minute() < 10) { Serial.print("0"); }
    Serial.print(now.minute(), DEC);
    Serial.print(':');
    if (now.second() < 10) { Serial.print("0"); }
    Serial.print(now.second(), DEC);
    Serial.println();
}

void setup() {
    Serial.begin(19200); // Serial port to PC
    while (!Serial); // for Leonardo
    Serial.println(F("Initialized ds3231 example1 v1.0"));

    // initialize the RTC
    rtc.begin();
}

void loop() {
    printTime();

    delay(100);
}